CYLINDER HEAD DISASSEMBLY

PROCEDURE

1. REMOVE INTAKE VALVE

   1. Place the cylinder head sub-assembly on a wooden block.

   2. 

      Using SST, compress the inner compression spring and remove the valve spring retainer locks.

      09202-70020

   3. Remove the valve spring retainer, inner compression spring and intake valve.

      Tip:

      Arrange the removed parts in the correct order.

2. REMOVE EXHAUST VALVE

   1. Place the cylinder head sub-assembly on a wooden block.

   2. 

      Using SST, compress the inner compression spring and remove the valve spring retainer locks.

      09202-70020

   3. Remove the valve spring retainer, inner compression spring and exhaust valve.

      Tip:

      Arrange the removed parts in the correct order.

3. REMOVE VALVE STEM OIL SEAL

   1. 

      Using needle-nose pliers, remove the valve stem oil seal.

4. REMOVE VALVE SPRING SEAT PLATE WASHER

   1. 

      Using compressed air and a magnet hand, remove the valve spring seat plate washer by blowing air onto it.