HORN INSPECTION

PROCEDURE

  1. INSPECT HIGH PITCHED HORN ASSEMBLY (for Hatchback, Wagon)

    1. E256771C03

      *a

      Component without harness connected

      (High Pitched Horn Assembly)

      *b

      Body ground

      Apply battery voltage and check the operation of the high pitched horn assembly according to the table below.

      OK

      Measurement Condition

      Specified Condition

      Battery positive (+) → Terminal A24-1

      Battery negative (-) → Body ground

      Horn sounds

      If the result is not as specified, replace the high pitched horn assembly.

  2. INSPECT LOW PITCHED HORN ASSEMBLY (for Sedan)

    1. E226259C23

      *a

      Component without harness connected

      (Low Pitched Horn Assembly)

      *b

      Body ground

      Apply battery voltage and check the operation of the low pitched horn assembly according to the table below.

      OK

      Measurement Condition

      Specified Condition

      Battery positive (+) → Terminal A24-1

      Battery negative (-) → Body ground

      Horn sounds

      If the result is not as specified, replace the low pitched horn assembly.