NAVIGATION SYSTEM, Diagnostic DTC:B157D

DTC Code DTC Name
B157D DAB Tuner Antenna Disconnected

DESCRIPTION

This DTC is stored when a malfunction occurs in the amplifier antenna assembly which is connected to the navigation ECU sub-assembly.

DTC No. DTC Detection Condition Trouble Area
B157D The digital audio broadcasting antenna assembly is not connected.

  • Antenna cord sub-assembly

  • No. 2 antenna cord sub-assembly

  • Roof antenna pole sub-assembly

  • Amplifier antenna assembly

  • Navigation ECU sub-assembly

PROCEDURE


  1. REPLACE ANTENNA CORD SUB-ASSEMBLY


    1. Replace the antenna cord sub-assembly Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check if the same DTC is output again.

      OK
      No DTCs are output.

    OK

    END

    NG

  2. INSPECT NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Disconnect the No. 2 antenna cord sub-assembly.

    2. Measure the resistance of the No. 2 antenna cord sub-assembly to check for an open circuit in the No. 2 antenna cord sub-assembly.

      Standard Resistance
      Below 1 Ω

    3. Measure the resistance between the No. 2 antenna cord sub-assembly and body ground to check for a short circuit in the No. 2 antenna cord sub-assembly.

      Standard Resistance
      10 kΩ or higher

    NG

    REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY Click here

    OK

  3. REPLACE ROOF ANTENNA POLE SUB-ASSEMBLY


    1. Replace the roof antenna pole sub-assembly Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check if the same DTC is output again.

      OK
      No DTCs are output.

    OK

    END

    NG

  4. REPLACE AMPLIFIER ANTENNA ASSEMBLY


    1. Replace the amplifier antenna assembly Click here.

    2. Clear the DTCs Click here.

    3. Recheck for DTCs and check if the same DTC is output again.

      OK
      No DTCs are output.

    OK

    END

    NG

    REPLACE NAVIGATION ECU SUB-ASSEMBLY Click here