SEAT HEATER CONTROL(for Fixed Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

B0069JE

PROCEDURE


  1. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY LH


    1. B006AAE

      Attach the clamp and install the seat heater control sub-assembly LH.

    2. Connect the connector.

    3. B006E4RC01
      *a Hog Ring Pliers

      Using hog ring pliers, install 3 new hog rings.

      Note


      • Be careful not to damage the separate type rear seatback cover LH.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.

  2. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR SEATBACK HOLDER

    Click here

  4. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  5. INSTALL REAR SEATBACK ASSEMBLY

    Click here

  6. INSTALL NO. 1 SEAT ARMREST CAP

    Click here

  7. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  9. CHECK SRS WARNING LIGHT

    Click here

  10. INSPECT SEAT HEATER SYSTEM

    Click here