FUEL PRESSURE REGULATOR REMOVAL

PROCEDURE

  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    • After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click hereClick hereClick here).

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick here).

  3. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click hereClick here

  4. REMOVE AIR CLEANER CAP AND HOSE

    Click hereClick here

  5. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

    1. A231381

      Disconnect the No. 2 fuel tube from the pressure regulator (Click here).

      CAUTION:

      Put a cloth or equivalent under the pressure regulator.

    2. A231382

      Disconnect the No. 1 air hose from the pressure regulator.

    3. A231383

      Remove the 2 bolts, and then pull out the pressure regulator.

    4. Remove the O-ring from the pressure regulator.