FRONT EVAPORATOR TEMPERATURE SENSOR REASSEMBLY

PROCEDURE

  1. INSTALL NO. 1 COOLER THERMISTOR

    E247586C01

    *1

    1 Fin
    Note:

    If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted.

    1. Insert the sensor to a location that is 1 fin to the right or left of its previous location.

      Standard Dimension

      Area

      Specified Condition

      a

      50 mm (1.97 in.)

      b

      46.7 mm (1.84 in.)

      c

      33.3 mm (1.31 in.)

      d

      154.1 mm (6.07 in.)

      e

      25 mm (0.98 in.)

  2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

    Click here

  3. INSTALL DAMPER SERVO SUB-ASSEMBLY LH

    Click here

  4. INSTALL DAMPER SERVO SUB-ASSEMBLY RH

    Click here

  5. INSTALL COOLER EXPANSION VALVE

    Click here

  6. INSTALL AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

    Click here

  7. INSTALL AIR CONDITIONING HARNESS

    Click here

  8. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

    Click here

  9. INSTALL QUICK HEATER ASSEMBLY (w/ PTC Heater)

    Click here

  10. INSTALL DRAIN COOLER HOSE

    Click here

  11. INSTALL ASPIRATOR HOSE

    Click here

  12. INSTALL DEFROSTER NOZZLE ASSEMBLY

    Click here

  13. INSTALL BLOWER ASSEMBLY

    Click here