FORWARD RECOGNITION CAMERA SYSTEM, Diagnostic DTC:C1AA9

DTC Code DTC Name
C1AA9 Front Camera Module Beam Axis Not Adjusted

DESCRIPTION

If the camera sensor optical axis learning is not performed after installing the forward recognition camera, DTC C1AA9 is stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AA9

Front Camera Module Beam Axis Not Adjusted

2 seconds after the power switch is turned on (IG), the forward recognition camera detects that forward recognition camera adjustment has not been completed.

Forward recognition camera

CAUTION / NOTICE / HINT

Note:

  • When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.

  • If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera learning.

    Click here

PROCEDURE

  1. CLEAR DTC

    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / Front Recognition Camera / Trouble Codes.

    5. Clear the DTCs.

      Click here

      Chassis > Front Recognition Camera > Clear DTCs

    Result

    Proceed to

    NEXT
    NEXT

  2. PERFORM FORWARD RECOGNITION CAMERA OPTICAL AXIS LEARNING

    1. Adjust the forward recognition camera.

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  3. CHECK FOR DTCs

    1. Make sure that the following conditions are met.

      Tip:

      If the conditions are not met, the system cannot detect the malfunction.

      1. Wait 2 seconds or more after turning the power switch on (IG).

    2. Check for DTCs.

      Click here

      Chassis > Front Recognition Camera > Trouble Codes

    Result

    Result

    Proceed to

    DTC C1AA9 is not output

    A

    DTC C1AA9 is output

    B
    A

    END

    B

    REPLACE FORWARD RECOGNITION CAMERA

    Click here