ACCELERATOR PEDAL SENSOR ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

   1. Connect the GTS to the DLC3.

   2. Turn the power switch on(IG).

   3. Turn the GTS on.

   4. Enter the following menus: Powertrain / Hybrid Control / Data List / Accel Pedal Pos #1, Accel Pedal Pos #2.

      Powertrain > Hybrid Control > Data List

      Tester Display
      Accel Pedal Pos #1
      Accel Pedal Pos #2

   5. Operate the accelerator pedal sensor assembly and check that the "Accel Pedal Pos #1, Accel Pedal Pos #2" values are within the specification.

      Standard (Accel Pedal Pos #1)

      Accelerator Pedal Condition	Specified Condition
      Released	10 to 22%
      Depressed	52 to 90%

      Standard (Accel Pedal Pos #2)

      Accelerator Pedal Condition	Specified Condition
      Released	24 to 40%
      Depressed	68 to 99%

      If the result is not as specified, check the accelerator pedal sensor assembly, wire harness or ECM.