FRONT DOOR LOCK REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Click here.

  2. REMOVE DECK BOARD ASSEMBLY

    Click here

  3. REMOVE NO. 1 DECK BOARD

    Click here

  4. REMOVE NO. 2 DECK BOARD

    Click here

  5. REMOVE REAR DECK FLOOR BOX

    Click here

  6. REMOVE DECK FLOOR BOX RH

    Click here

  7. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  9. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  10. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  11. REMOVE DOOR ARMREST COVER

    Click here

  12. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  13. REMOVE FRONT DOOR TRIM BRACKET

    Click here

  14. REMOVE FRONT DOOR SERVICE HOLE COVER

    Click here

  15. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  16. REMOVE FRONT DOOR GLASS RUN

    Click here

  17. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY

    Click here

  18. REMOVE FRONT DOOR OUTSIDE HANDLE COVER WITH LOCK CYLINDER ASSEMBLY (for Driver Side)

    Click here

  19. REMOVE FRONT DOOR LOCK ASSEMBLY


    1. A005DO4E01
      Text in Illustration
      *1 Front Door Lock Open Rod

      Disconnect the connector.

    2. Using a T30 "TORX" socket wrench, remove the 3 screws.

    3. Move the front door lock assembly downward and disconnect the front door lock open rod, and then remove the front door lock assembly.

    4. A005E0D

      When reusing the front door lock assembly:


      1. Remove the door lock wiring harness seal from the front door lock assembly.

    5. A005E2O

      Remove the front door lock remote control cable assembly from the front door lock assembly.

    6. A005BNK

      Using a screwdriver, disengage the 3 claws.

    7. A005DJZ

      Remove the front door inside locking cable assembly from the front door lock assembly.