FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat)

    Click here

  3. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat)

    Click here

  4. CONNECT FRONT SEAT AIRBAG ASSEMBLY


    1. w/ Seat Heater System:


      1. Engage the clamp to connect the seat heater wire harness.

    2. Engage the fastener to install the airbag wire harness.

    3. A005AWO

      Engage the claw and 4 clamps to connect the airbag wire harness.

    4. Connect the rubber band.

  5. INSTALL FRONT SEAT ASSEMBLY

    for Manual Seat: Click here

    for Power Seat: Click here

  6. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here