REAR BUMPER(for Wagon) DISASSEMBLY
PROCEDURE
REMOVE NO. 4 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)
REMOVE ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)
REMOVE NO. 4 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)
REMOVE NO. 2 LUGGAGE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)
Disconnect the 4 connectors.

Adhesive Tape
-
-
Remove the adhesive tape from the rear bumper cover.
Disengage the 4 clamps to remove the No. 2 luggage room wire.
REMOVE REAR BUMPER PAD LH
-
Remove the rear bumper pad LH.
-
REMOVE REAR BUMPER PAD RH
Tip:Use the same procedure as for the LH side.
REMOVE CENTER REAR BUMPER PAD
-
Remove the 2 center rear bumper pads.
Tip:Use the same procedure for the RH side and LH side.
-
REMOVE REFLEX REFLECTOR ASSEMBLY LH
-
Remove the screw.
Disengage the claw to remove the reflex reflector assembly LH.
-
REMOVE REFLEX REFLECTOR ASSEMBLY RH
Tip:Use the same procedure as for the LH side.
REMOVE REAR BUMPER GUARD
Remove the 5 clips.
Disengage the 8 claws and 5 guides to remove the rear bumper guard.
Remove the 3 clips.
Disengage the 6 claws and 3 guides to remove the No. 2 rear bumper moulding.
REMOVE REAR BUMPER MOULDING
Remove the 5 clips.
Disengage the 8 claws and 5 guides to remove the rear bumper moulding.
REMOVE REAR BUMPER SIDE RETAINER LH
-
Remove the 3 screws.
-
Disengage the 4 claws and guide to remove the rear bumper side retainer LH.
-
REMOVE REAR BUMPER SIDE RETAINER RH
Tip:Use the same procedure as for the LH side.
REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
REMOVE REAR COMBINATION LIGHT ASSEMBLY RH
Tip:Use the same procedure as for the LH side.
REMOVE UPPER REAR BUMPER RETAINER LH
-
Remove the screw and upper rear bumper retainer LH.
-
REMOVE UPPER REAR BUMPER RETAINER RH
Tip:Use the same procedure as for the LH side.
REMOVE REAR BUMPER SIDE SEAL LH
-
Remove the 3 clips and rear bumper side seal LH.
-
REMOVE REAR BUMPER SIDE SEAL RH
-
Remove the 3 clips and rear bumper side seal RH.
-
REMOVE NO. 1 REAR BUMPER REINFORCEMENT
-
Remove the 8 bolts and No. 1 rear bumper reinforcement.
-
REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH
-
Remove the 3 bolts and rear bumper arm sub-assembly LH.
-
REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH
Tip:Use the same procedure as for the LH side.