8GR-FKS DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  2. REMOVE RADIATOR COVER PLATE

    Click here

  3. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  4. REMOVE LOWER RADIATOR AIR DEFLECTOR

    Click here

  5. REMOVE NO. 1 AIR CLEANER INLET

    Click here

  6. REMOVE FAN AND GENERATOR V BELT


    1. B005S3OC01
      *a 5 mm bi-hexagon wrench

      While releasing the belt tension by turning the belt tensioner clockwise, remove the fan and generator V belt from the V-ribbed belt tensioner assembly.

    2. While turning the V-ribbed belt tensioner assembly clockwise, align its holes, and then insert the 5 mm bi-hexagon wrench into the holes to secure the V-ribbed belt tensioner assembly.