CONDENSER (for 5L-E) REMOVAL


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM


    1. Start up the engine.

    2. A/C switch is ON.

    3. Operate the cooler compressor with an engine speed of approximately 1,000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor.

    4. Stop the engine.

    5. Using SST, Recover the refrigerant from the A/C system using a refrigerant recovery unit.

      SST
      09985-20010   ( 09985-02130, 09985-02150, 09985-02090, 09985-02110, 09985-02010, 09985-02050, 09985-02060, 09985-02070 )

  2. REMOVE FRONT BUMPER COVER

    Click here

  3. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

    A01DXR6

    1. Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser.

    2. Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

  4. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY

    A01E27N

    1. Remove the bolt and disconnect the air conditioning tube and accessory assembly from the cooler condenser.

    2. Remove the O-ring from the air conditioning tube and accessory assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

  5. REMOVE HOOD LOCK ASSEMBLY


    1. for LHD:

      Click here

    2. for RHD:

      Click here

  6. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

    A01DX99

    1. Remove the 7 bolts and upper radiator support sub-assembly.

  7. REMOVE COOLER CONDENSER ASSEMBLY

    A01DYPE

    1. Remove the cooler condenser assembly.