ENTRY AND START SYSTEM


  1. OUTLINE


    1. The entry and start system has the following main functions, making it a very user-friendly system.

      Function Outline
      Entry Function

      Entry Unlock:


      • All doors unlock when the lock/unlock switch on an outside door handle is pressed.

      Entry Lock:


      • All doors lock when the lock/unlock switch on an outside door handle is pressed.
      Wireless Door Lock Control The wireless door lock control function is a convenient system for locking and unlocking all the doors at a distance. The basic operation is the same as that of the wireless door lock control system.
      Start Function

      The start function is operated by simply pressing the engine switch while carrying the electrical key transmitter sub-assembly. When the engine switch is pressed, the certification ECU turns on/off the ACC relay, IG1 relay and IG2 relay to switch the power source pattern.


      • The power source mode changes depending on the depression of the brake pedal*1 or clutch pedal*2 and the shift lever position*1.
      Immobiliser The immobiliser function compares the ID code registered in the certification ECU*3 or ID code box*4 with the ID code of the transponder chip embedded in the electrical key transmitter sub-assembly.
      Steering Lock The steering lock function is operated to lock and unlock the steering wheel by using a lock/unlock motor in the steering column assembly.

      • *1: Models with automatic transmission

      • *2: Models with manual transmission

      • *3: Models without ID code box

      • *4: Models with ID code box