PRE-COLLISION SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

  1. CUSTOMIZE PRE-COLLISION SYSTEM

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    Tip:

    The following items can be customized.

    1. Customizing with the GTS.

      Tip:

      The default settings of the PCS function and PCS warning sensitivity used when the ignition switch is turned to ON can be changed.

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Chassis / PCS/LDA/RSA/LVN / Utility / Customize.

      5. Select the setting by referring to the table below.

        Table 1. Sensor

        Tester Display

        Description

        Default

        Setting

        ECU

        PCS Operation State Retention Setting

        Refer to the table below

        OFF

        0:OFF,1:ON

        Pre-collision city sensor

        PCS Alarm Activation Distance Retention Setting 1

        Refer to the table below

        OFF

        0:OFF,1:ON

        Pre-collision city sensor

        PCS Alarm Activation Distance Retention Setting 2

        Refer to the table below

        ON

        0:OFF,1:ON

        Pre-collision city sensor

        PCS Alarm Activation Distance Retention Setting 3

        Refer to the table below

        OFF

        0:OFF,1:ON

        Pre-collision city sensor

        Customize Setting

        Description

        Setting

        PCS Operation State Retention Setting

        Function to maintain the pre-collision system on/off setting when the ignition switch is turned off and then ON.

        OFF: Not maintained (pre-collision system always turns on)

        ON: Maintained

        PCS Alarm Activation Distance Retention Setting 1

        Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained

        PCS Alarm Activation Distance Retention Setting 2

        Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is on.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained

        PCS Alarm Activation Distance Retention Setting 3

        Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system if off.

        OFF: Not maintained (Setting changes to "Mid")

        ON: Maintained