DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. Front Drive Shaft


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the front differential side, and a Rzeppa type CVJ is used on the front axle side.

      2. A dynamic damper is provided on some shafts to reduce vibration and noise.

        Figure 1. Models with EA64 Manual Transaxle

        A00YY9NC01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *3 Dynamic Damper - -
        *a LH Side *b RH Side
        A00YYR0 Front Axle Side A00YYDY Front Differential Side

        Figure 2. Models with EA64F Manual Transaxle or U660F Automatic Transaxle

        A00YYQ6C01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *3 Dynamic Damper - -
        *a LH Side *b RH Side
        A00YYR0 Front Axle Side A00YYDY Front Differential Side

        Figure 3. Models with EB61 or EB63 Manual Transaxle

        A00YY0MC01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *a LH Side *b RH Side
        A00YYR0 Front Axle Side A00YYDY Front Differential Side

        Figure 4. Models with EB61F or EB63F Manual Transaxle

        A00YY5BC01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *3 Dynamic Damper - -
        *a LH Side *b RH Side
        A00YYR0 Front Axle Side A00YYDY Front Differential Side

        Figure 5. Models with U760E Automatic Transaxle

        A00YY4TC01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *3 Dynamic Damper - -
        *a LH Side *b RH Side
        A00YYR0 Front Axle Side A00YYDY Front Differential Side

        Figure 6. Models with U760F Automatic Transaxle

        A00YY7ZC01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *3 Dynamic Damper - -
        *a LH Side *b RH Side
        A00YYR0 Front Axle Side A00YYDY Front Differential Side

        Figure 7. Models with K111 CVT

        A00YY39C01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *3 Dynamic Damper - -
        *a LH Side *b RH Side
        A00YYR0 Front Axle Side A00YYDY Front Differential Side

        Figure 8. Models with K111F CVT

        A00YYIIC01
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *3 Dynamic Damper - -
        *a LH Side *b RH Side
        A00YYR0 Front Axle Side A00YYDY Front Differential Side

    2. Rear Drive Shaft (4WD/AWD Models)


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the rear differential side, and a Rzeppa type CVJ is used on the rear axle side. Both the right and left have the same length to ensure straightline stability.

        A00YYD7C01
        *1 Tripod Type CVJ *2 Rzeppa Type CVJ
        A00YYR0 Rear Differential Side A00YYDY Rear Axle Side