WHEEL OPENING MOULDING(for Front Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY


    1. A01RBEAC01

      Engage the 5 claws and 9 clips as shown in the illustration.

    2. Install the front fender moulding sub-assembly with the 4 clips.

  2. CONNECT FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY


    1. Connect the front fender splash shield sub-assembly with the 2 clips.