CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

  1. INSTALL CAMSHAFT POSITION SENSOR

    1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

      Note:

      If reusing the camshaft position sensor, be sure to inspect the O-ring.

    2. Using an E6 "TORX" socket wrench, install the camshaft position sensor with the bolt.

      3.6 N*m

      37 kgf*cm

      32 in.*lbf

      Note:

      • If the camshaft position sensor has been struck or dropped, replace it.

      • Make sure that the O-ring is not cracked or moved out of place when installing the camshaft position sensor.

    3. Connect the camshaft position sensor connector.

  2. INSTALL ENGINE COVER

    Click here

  3. INSTALL NO. 1 ENGINE COVER

    Click hereClick hereClick here