SKID CONTROL BUZZER INSTALLATION

PROCEDURE

1. INSTALL SKID CONTROL BUZZER ASSEMBLY

   1. Connect the connector.

      Note:

      Securely connect the connector.

   2. Attach the clamp to install the buzzer.

      Note:

      • Securely insert the clamp into the dash panel.

      • If the buzzer is dropped, replace it.

2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   1. Install the instrument panel safety pad sub-assembly (Click hereClick here).

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick here).