FRONT SHOCK ABSORBER(for 2WD) DISPOSAL

PROCEDURE


  1. DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY

    CAUTION:

    Always use proper safety equipment and be careful when drilling because shards of metal may fly about.

    B0069NS

    Tech Tips

    The gas is colorless, odorless and non-poisonous.


    1. Fully extend the front shock absorber assembly.

    2. B005QRVC01
      *a 120 mm (4.72 in.)

      Using a drill, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.