PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    A01DV2WE06

    1. AT Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Shift Lever Position Specified Condition
      4 (B) - 5 (L) P or N Below 1 Ω
      4 (B) - 5 (L) Not in P or N 10 kΩ or higher
      1 (RL) - 2 (RB) R Below 1 Ω
      1 (RL) - 2 (RB) Not in R 10 kΩ or higher
      2 (RB) - 7 (DL) D or 4 Below 1 Ω
      2 (RB) - 7 (DL) Not in D or 4 10 kΩ or higher
      2 (RB) - 3 (2L) 3 Below 1 Ω
      2 (RB) - 3 (2L) Not in 3 10 kΩ or higher
      2 (RB) - 8 (LL) 2 or L Below 1 Ω
      2 (RB) - 8 (LL) Not in 2 or L 10 kΩ or higher

      If the result is not as specified, replace the switch assembly.