AMBIENT LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  4. REMOVE DOOR TRIM COVER

    Click here

  5. REMOVE COURTESY LIGHT ASSEMBLY

    Click here

  6. REMOVE FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

  7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  8. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. A01OCNEC02
      B008GB8 Double-sided Tape

      Separate the double-sided tape to move the pad as shown in the illustration.

    2. A01OC0T

      Disengage the 2 clamps.

    3. A01OA7H

      Remove the 17 screws.

    4. A01OCCD

      Disengage the 6 guides as shown in the illustration.

    5. A01O9H6

      Disengage the claw and 6 guides as shown in the illustration to remove the No. 1 interior illumination light assembly from the front door trim board sub-assembly.