FUEL PUMP REASSEMBLY

CAUTION / NOTICE / HINT

A223122
Note:

Do not disconnect the hoses indicated in the illustration.

PROCEDURE

  1. INSTALL FUEL MAIN VALVE ASSEMBLY

    1. A223172C01

      *1

      New O-ring

      Apply a light coat of gasoline to 2 new O-rings and install the O-rings to the fuel main valve.

    2. Install the fuel main valve to the fuel filter case.

      Note:

      Make sure the O-rings are not cut or pinched during installation.

  2. INSTALL FUEL PUMP

    1. Connect the fuel pump wire harness connector to the fuel pump.

    2. A223260C01

      *1

      New O-ring

      *2

      Fuel Pump Spacer

      Apply a light coat of gasoline to a new O-ring. Then install the fuel pump spacer and O-ring to the fuel pump.

    3. A223259C02

      *1

      Fuel Filter Case

      Attach the 5 claws to the claw holes to install the fuel pump to the fuel filter case.

  3. INSTALL NO. 1 FUEL SUB-TANK

    1. A223171

      Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.

    2. A223170

      Attach the 3 claws to the claw holes.

    3. Install the tube part to the No. 1 fuel sub-tank.

      1. A223268C01

        *1

        Jet Pump

        Attach the claw on the end of the tube to the claw hole. Connect the tube to the 2 clamps on the No. 1 fuel sub-tank.

    4. Connect the jet pump to the No. 1 fuel sub-tank.

    5. Connect the fuel pump connector.

  4. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here