REAR VIEW MONITOR SYSTEM(w/ Side Monitor System), Diagnostic DTC:C1611
| DTC Code | DTC Name |
|---|---|
| C1611 | ECU Malfunction |
DESCRIPTION
This DTC is stored if the parking assist ECU judges that there is an internal malfunction as a result of its self check.
If the parking assist ECU cannot read the stored information when it is activated, the parking assist ECU judges that there is an internal malfunction and stores this DTC.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
C1611 |
ECU Malfunction |
|
Parking assist ECU |
PROCEDURE
READ VALUE USING INTELLIGENT TESTER
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Chassis / Parking Assist Monitor System / Data List.
Check the Data List for proper functioning of the following items.
Chassis > IPA/Parking Assist Monitor > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
EEPROM Status (Initial read)
Parking assist ECU information
OK or NG
OK: Parking assist ECU is normal
NG: Parking assist ECU is abnormal
-
ASIC Output Status
Output condition of camera display signal
OK or NG
OK: Output condition of camera display signal is normal
NG: Output condition of camera display signal is abnormal
-
Result
Result
Proceed to
OK is displayed for both items
A
NG is displayed for EEPROM Status (Initial read)
NG is displayed for "AISIC Output Status"
B
CHECK FOR DTC
Clear the DTCs.
Chassis > IPA/Parking Assist Monitor > Clear DTCs
Check for DTCs.
Chassis > IPA/Parking Assist Monitor > Trouble Codes
Result
Result
Proceed to
DTC C1611 is output
A
No DTC is output
B
Tip:If DTC C1611 is output frequently, replace the parking assist ECU even though the DTC is not output when rechecking for DTCs.