REAR SEAT OUTER BELT ASSEMBLY(for Smart Cab) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE BACK PANEL TRIM

    Click here

  3. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH (for Floor Anchor)


    1. B00250V

      Remove the bolt and disconnect the floor anchor of the rear No. 1 seat outer belt assembly LH.

  4. REMOVE LOWER QUARTER TRIM PANEL LH

    Click here

  5. REMOVE SEAT BELT ANCHOR COVER CAP

    Click here

  6. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY LH


    1. B0026E7

      Remove the bolt and disconnect the shoulder anchor of the rear No. 1 seat outer belt assembly LH.

    2. A01SJPN

      Remove the bolt.

    3. Detach the 2 guides and remove the rear No. 1 seat outer belt assembly LH.