FRONT BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Pre-collision System)

    Click here

  2. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Bar Type Radiator Grille)


    1. w/ Bracket:


      1. B0087KU

        Remove the 2 screws.

      2. B0087GAC01
        B00847Z Remove in this Direction

        Disengage the 4 claws to remove the front bumper extension mounting bracket as shown in the illustration.

  3. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (for Mesh Type Radiator Grille)


    1. B0084R9

      Remove the 2 screws.

    2. B00861GC01
      B00847Z Remove in this Direction

      Disengage the 4 guides and 2 claws to remove the front bumper extension mounting bracket as shown in the illustration.

  4. REMOVE FRONT BUMPER PAD LH (for Bar Type Radiator Grille)


    1. B0088EE

      Disengage the 2 claws and guide to remove the front bumper pad LH.

  5. REMOVE FRONT BUMPER PAD RH (for Bar Type Radiator Grille)

    Tech Tips

    Use the same procedure as for the LH side.

  6. REMOVE FRONT BUMPER PAD LH (for Mesh Type Radiator Grille)


    1. B0083UH

      Disengage the 2 claws and guide to remove the front bumper pad LH.

  7. REMOVE FRONT BUMPER PAD RH (for Mesh Type Radiator Grille)

    Tech Tips

    Use the same procedure as for the LH side.

  8. REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  9. REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  10. REMOVE NO. 4 ENGINE ROOM WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. for Bar Type Radiator Grille:


      1. Disengage the 10 clamps to remove the No. 4 engine room wire.

        B0086V1

    2. for Mesh Type Radiator Grille:


      1. Disengage the 12 clamps to remove the No. 4 engine room wire.

        B008692

  11. REMOVE HEADLIGHT WASHER COVER LH (w/ Headlight Cleaner System)

    Click here

  12. REMOVE HEADLIGHT WASHER COVER RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  13. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  14. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  15. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. Disengage the 7 clamps to remove the headlight cleaner hose.

      B0088JM

  16. REMOVE FRONT BUMPER HOLE COVER LH (for Bar Type Radiator Grille)


    1. B0087RHC01
      *a Hook
      B00847Z Remove in this Direction

      Disengage the 4 claws as shown in the illustration.

    2. Disengage the hook to remove the front bumper hole cover LH.

  17. REMOVE FRONT BUMPER HOLE COVER LH (for Mesh Type Radiator Grille)


    1. B0087VFC01
      *a Hook
      B00847Z Remove in this Direction

      Disengage the 6 claws as shown in the illustration.

    2. Disengage the hook to remove the front bumper hole cover LH.

  18. REMOVE FRONT BUMPER HOLE COVER RH (for Mesh Type Radiator Grille)

    Tech Tips

    Use the same procedure as for the LH side.

  19. REMOVE HOOD TO FRONT END PANEL SEAL


    1. B0083PI

      Disengage the 6 clips.

    2. B0085C2C01
      B0087TV Double-sided Tape

      Separate the double-sided tape and disengage the guide to remove the hood to front end panel seal.

  20. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY


    1. B0087H0

      Remove the 2 screws.

    2. B00890X

      Disengage the 2 claws and guide to remove the radiator grille emblem assembly.

  21. REMOVE RADIATOR GRILLE SIDE MOULDING LH (for Bar Type Radiator Grille)


    1. B0084F2

      Remove the screw.

    2. B0088AQC01
      B00847Z Remove in this Direction

      Disengage the 3 claws to remove the radiator grille side moulding LH as shown in the illustration.

  22. REMOVE RADIATOR GRILLE SIDE MOULDING RH (for Bar Type Radiator Grille)

    Tech Tips

    Use the same procedure as for the LH side.

  23. REMOVE RADIATOR GRILLE (for Bar Type Radiator Grille)


    1. B00877Z

      Remove the 2 clips.

    2. B0086LJ

      Remove the 6 screws and radiator grille.

  24. REMOVE RADIATOR GRILLE (for Mesh Type Radiator Grille)


    1. B008514

      Remove the 2 clips.

    2. B0085HK

      Remove the 10 screws and radiator grille.

  25. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  26. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  27. REMOVE LOWER RADIATOR GRILLE MOULDING (for Mesh Type Radiator Grille)


    1. B00896E

      Remove the 2 screws.

    2. Disengage the 16 claws to remove the lower radiator grille moulding.

      B0084BZ

  28. REMOVE LOWER RADIATOR GRILLE MOULDING LH (for Mesh Type Radiator Grille)


    1. B00884X

      Disengage the 10 claws to remove the lower radiator grille moulding LH.

  29. REMOVE LOWER RADIATOR GRILLE MOULDING RH (for Mesh Type Radiator Grille)

    Tech Tips

    Use the same procedure as for the LH side.

  30. REMOVE FOG LIGHT COVER LH (for Mesh Type Radiator Grille)


    1. B0088RR

      Disengage the 6 claws to remove the fog light cover LH.

  31. REMOVE FOG LIGHT COVER RH (for Mesh Type Radiator Grille)

    Tech Tips

    Use the same procedure as for the LH side.

  32. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Bar Type Radiator Grille)


    1. B00863Z

      Remove the 6 screws.

    2. Disengage the 23 claws to remove the lower radiator grille sub-assembly.

      B00865W

  33. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Mesh Type Radiator Grille)


    1. B0087TH

      Remove the 2 screws.

    2. Disengage the 18 claws to remove the lower radiator grille sub-assembly.

      B0087WR

  34. REMOVE RADIATOR GRILLE SIDE MOULDING LH (for Mesh Type Radiator Grille)


    1. B0085DI

      Remove the 2 clips.

    2. B0087SM

      Disengage the 2 claws and 2 guides to remove the radiator grille side moulding LH.

  35. REMOVE RADIATOR GRILLE SIDE MOULDING RH (for Mesh Type Radiator Grille)

    Tech Tips

    Use the same procedure as for the LH side.

  36. REMOVE PIN HOLD CLIP


    1. B0087Z7C01
      B00847Z Remove in this Direction

      Disengage the 4 claws to remove the 2 pin hold clips as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  37. REMOVE FRONT FENDER LINER RETAINER


    1. B00851PC01
      B00847Z Remove in this Direction

      Remove the 2 front fender liner retainers as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  38. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. B0088MGC01
      B00847Z Remove in this Direction

      Disengage the 4 guides to remove the front bumper energy absorber as shown in the illustration.

  39. REMOVE FRONT BUMPER REINFORCEMENT


    1. Remove the headlight assembly LH.

      for LED Type Turn Signal Light:

      Click here

      for Bulb Type Turn Signal Light:

      Click here

    2. Remove the headlight assembly RH.

      Tech Tips

      Use the same procedure as for the LH side.

    3. B0088F1

      Disengage the 5 clamps.

    4. Remove the 6 bolts and front bumper reinforcement.

      B00874I

  40. REMOVE FRONT BUMPER SIDE RETAINER LH


    1. B0083DF

      Remove the bolt.

    2. B0083OVC01
      B00847Z Remove in this Direction

      Disengage the 2 clips to remove the front bumper side retainer LH as shown in the illustration.

  41. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.