ECM INSTALLATION

PROCEDURE

  1. INSTALL ECM

    1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

    2. Install the No. 1 ECM bracket to the ECM with the 2 screws.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

    3. Install the ECM with the 3 bolts.

      6.5 N*m

      66 kgf*cm

      58 in.*lbf

      Note:

      Avoid physical shock to the ECM.

    4. Attach the claw and connect the relay.

    5. Connect the 2 ECM connectors and lower the 2 levers.

      Note:

      • When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water or other foreign matter.

      • Be sure to securely connect the ECM connectors.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    1. Install the air cleaner case sub-assembly with the 3 bolts.

      7.0 N*m

      71 kgf*cm

      62 in.*lbf

  3. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  4. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

    1. Install the air cleaner cap sub-assembly to the air cleaner hose assembly and tighten the hose clamp.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

    2. Attach the 2 clamps.

    3. Connect the mass air flow meter connector and attach the wire harness clamp.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick here

  6. PERFORM REGISTRATION

    Click here

  7. PERFORM INITIALIZATION

    Click hereClick here