COMPRESSOR(for 1ND-TV) INSPECTION

PROCEDURE

  1. INSPECT COMPRESSOR ASSEMBLY WITH PULLEY (COMPRESSOR SOLENOID)

    1. I105051C07

      *a

      Component without harness connected

      (Compressor Assembly with Pulley)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (SOL-) - 2 (SOL+)

      20°C (68°F)

      10.1 to 11.1 Ω

      • If the result is not as specified, replace the compressor assembly with pulley.