EGR GAS TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL EGR GAS TEMPERATURE SENSOR

   Note:

   If the EGR gas temperature sensor is dropped, replace it with a new one.

   1. Using a 14 mm union nut wrench, install the EGR gas temperature sensor.

      30 N*m

      306 kgf*cm

      22 ft.*lbf

      Note:

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click here).

   2. Connect the EGR gas temperature sensor connector and slide the white-colored lock to engage it securely.