ENGINE UNIT


  1. CONSTRUCTION


    1. The pistons are made of aluminum alloy.

    2. Combustion chambers are provided on the pistons for direct injection.

    3. The shape of the combustion chamber has been optimized to achieve a low compression ratio, high engine output and low fuel consumption.

    4. A cooling channel is provided to achieve excellent piston cooling performance.

    5. To improve the wear resistance of the top ring groove, a Ni-resist cast iron ring carrier is used.

    6. Along with the improved engine performance, the piston skirt is applied with a resin coating to reduce friction loss.

    7. Due to increased machining precision of the cylinder bore diameter, it is not necessary to prepare pistons with different diameters.

      A00YY5EC01
      *a Front Mark *b Ni-resist Cast Iron Ring Carrier
      *c Combustion Chamber *d Cooling Channel
      A00YYCW Resin Coating - -