REAR SEAT ASSEMBLY (for Extra Cab) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


  1. REMOVE REAR SEAT CUSHION ASSEMBLY LH (w/ Seat Cushion)


    1. A01DXC8

      Operate the rear seat cushion lock hook release lever and pull up the rear seat cushion assembly LH to detach the hook.

      Text in Illustration
      A01E2TX Pull Up
      A01DZ8Z Release
    2. A01E1XM

      Detach the 2 hooks and rear seat cushion assembly LH.

  2. REMOVE REAR SEAT CUSHION ASSEMBLY RH (w/ Seat Cushion)

    Tech Tips

    Use the same procedures described for the LH side.

  3. REMOVE UPPER BACK PANEL GARNISH

    A01E08P

    1. Detach the 4 claws and 5 clips and remove the upper back panel garnish.

  4. REMOVE REAR SEATBACK ASSEMBLY


    1. A01DV2O

      Remove the 2 bolts.

    2. Lift up the rear seatback assembly in the direction indicated by the arrow to detach the 2 hooks from the vehicle body. Then remove the rear seatback assembly.

      Note

      Be careful not to damage the vehicle body.