FEATURES


  1. OUTLINE


    1. Interior


      1. The interior design aims to offer a new SUV driving pleasure by combining a "sporty cockpit-like driver's area" with a "spacious and open atmosphere inherent of an SUV", which expresses a bold structure based on functionality and a refined feel of the interior space.

      2. A clear and refined design realized by the structure that consists of shapes, quality materials and color schemes with making the best use of a functional layout.

      3. A feeling of a framed area and a spacious, open atmosphere: The driver's area is cockpit-like framed, (*a in illustration) while the soft padded instrument panel is extended beyond the vehicle centerline to create a wide feel. (*b in illustration) This gives a sense of unity between the framed driver's area and the front/rear passengers' area with a spacious, open atmosphere.

        A01V2AXE01

    2. Instrument Panel


      1. Realization of a combination of the "strong, stable impression by a bold architecture through axes" (*a in illustration) and a "refined and soothing impression by soft padding". (*b in illustration)

        A01V2FVE01

      2. Decoration panels and molding soft pads are used in each part of the instrument panel, thus achieving an improved quality.

        A01V2FHC01
        No. Parts Grade Ornament/Finishing Type
        1 Instrument Cluster Finish Panel Garnish ALL Silver Paint
        2 Instrument Panel Register Assembly No. 2 ALL Silver Paint
        3 Instrument Cluster Finish Panel Upper ALL 4 Colors
        4 Instrument Cluster Finish Panel Sub-assembly ALL Silver Paint
        5 Cup Holder Ring ALL Silver Paint
        6 Shift Gate Panel Base Molding Colored Resin (Black)
        Middle, High Silver Paint
        7 Shift Knob ALL Silver Paint
        8 Instrument Panel Finish Panel Lower Center ALL Silver Paint
        9 Shift Panel Base, Middle Mat Black Paint
        High Mat Black Paint
        10 Instrument Cluster Finish Panel Sub-assembly Lower Center ALL Mat Black Paint
        11 Instrument Panel Garnish Subassembly No. 2 ALL 4 Colors
        12 Instrument Cluster Finish Panel Center No. 1 ALL Silver Paint
        13 Instrument Panel Register Assembly No. 4 (Bezel) ALL Mat Black Paint
        14 Instrument Panel Register Assembly No. 4 (Knob) Base Molding Colored Resin (Black)
        Middle, High Silver-plated
        15 Steering Wheel Assembly ALL Silver Paint
        16 Instrument Panel Register Assembly No. 3 (Knob) Base Molding Colored Resin (Black)
        Middle, High Silver-plated
        17 Instrument Panel Register Assembly No. 3 (Bezel) ALL Mat Black Paint

      3. An open tray is provided in the upper portion of the ornament for the front passenger seat to offer a lidless storage space which can be easily used. A soft mat is provided on the bottom surface of the tray.

        A01V2E4C01
        *1 Passenger Side Open Tray - -

      4. Storage spaces, which were created with usability in mind, are provided in various places of the instrument panel, thus achieving improved convenience.


        • A tray is provided for storing small articles in the console box (*a in illustration). The left and right side knobs allow for opening the tray and the lid together (*B in illustration) or opening the lid alone (*A in illustration).

        • The cup holders in the front and the rear part of the console (*d and *e in illustration) are equipped with grips (*c in illustration) in order to securely hold the cups. The front side cup holder (*d in illustration) has an opening to accommodate for a mug cup with a handle.

        • A console tray (*f in illustration) easily accessible from the driver seat is provided. A mat made of a soft material is provided on the bottom of the console tray to help prevent items from slipping.

          A01V2H2C01
          *a Tray *b Console Box
          *c Grip *d Front Cup Holder
          *e Rear Cup Holder *f Console Tray

      5. Depending on the grade, LED illumination is provided below the instrument panel garnish subassembly No. 2. This enables users to easily recognize the locations of the center switches and the cup holder in consideration of usability. Blue illumination is used throughout the interior, helping to express a high-quality interior space.

        A01V2A9C01
        *1 Instrument Panel Garnish Sub-assembly No. 2 *2 LED Illumination
        *3 Instrument Panel Finish Panel Lower No.2 *4 Console Panel Sub-assembly Upper
        *a A - A Cross Section - -

      6. Attention has been given to the layout of the light source of the footwell light illumination to pleasantly illuminate the foot area from the center of the occupant seat. Not only is bright and entertaining illumination provided when the door has been opened, illumination also decreases while driving in order to decrease driver discomfort.

        A01V2HJC01
        *a Footwell Light Illumination - -

      7. A stereo jack adapter is provided in the instrument panel finish panel lower No. 2.

      8. 2 accessory sockets are provided on the instrument panel finish panel lower No. 2. Also, 1 accessory socket is provided on the rear of the console box sub-assembly rear, in consideration of usability for rear seat passengers.

        A01V2I2C01
        *1 Accessory Socket *2 Stereo Jack Adapter
        *3 Instrument Panel Finish Panel Lower No.2 *4 Console Box Sub-assembly Rear

      9. The height of the armrest has been adjusted so that passengers can rest their arms comfortably.

      10. A forward-and-backward sliding mechanism is provided on the armrest. 2 slide positions, 35 mm (1.4 in.) and 70 mm (2.8 in.) forward from the initial position are provided in consideration of usability according to the physical sizes of the passengers.

        A01V2APC01
        *1 Armrest - -
        *a 35 mm (1.4 in.) *b 70 mm (2.8 in.)

    3. Door Trim


      1. Component layout that takes operability into consideration. (*a in illustration) Functional items such as switches, door handle, grip and storage placed at the front section. (*a in illustration) Soft padding used widely at the rear section that touches the passenger. (*b in illustration)

        A01V2BZC01
        *a Front Side (Functional Area) *b Rear Side (Comfort Area)

      2. Decorations and soft pads similar to those of the instrument panel are used.

      3. A bottle holder and an accessory pocket which can accommodate A4 size paper are provided in the lower portion of the front door trim.

        A01V2E1C01
        *1 Door Ornament (Decorative Parts) *2 Door Arm Rest (Leather Patrs)
        *3 Accessory Pocket or Bottle Holder - -

      4. Thermoplastic PolyOlefin (TPO) upholstery is provided on the front door trim board subassembly, achieving an excellent feel.

      5. Elastomer is used for the door grip, resulting in an excellent feel.

        A01V2IMC01
        *1 Front Door Trim Board Sub-assembly - -
        *a A - A Cross Section *b TPO
        *c Elastomer - -

    4. Center Cluster


      1. A simple switch arrangement which is horizontally laid out is used for the audio.

      2. Plating may be used on the opening area of the CD slot and the switch separator depending on the specification, thus producing a high-class feel.

      3. Switches and a display are arranged close to each other for the automatic air conditioning, thus taking into account operability and visibility.

      4. Plated rings are used for the dials of the air conditioning, thus taking improved quality into consideration.

        Figure 1. Models with Automatic Air Conditioning

        A01V2A7C01
        *1 CD Slot *2 Audio Dial
        *3 Center Register Knob *4 Separator between Switches
        *5 Push Start Switch (Ring) *6 Air Conditioning Dial (Ring)

        Figure 2. Models with Manual Air Conditioning

        A01V2BGC01
        *1 Air Conditioning Dial (Ring) - -

    5. Bluetooth Audio System


      1. The Bluetooth audio system is provided.

    6. Bluetooth Hands-free System


      1. The Bluetooth hands-free system is provided.

    7. Navigation System


      1. The display is a wide 7.0-inch Wide Video Graphics Array (WVGA) with a pressure sensitive touch panel, offering improved ease of use.

      2. The SD for the navigation receiver assembly can be supplied separately, enhancing serviceability.

      3. An extension box, into which the navigation ECU is built, is used.

    8. Telematics System


      1. ERA-GLONASS is a subscription-based telematics service that uses Global Navigation Satellite System (GNSS) and cellular service (telephone function).

    9. Stop and Start System


      1. To achieve low emissions and enhanced fuel economy, the stop and start system has been developed.

    10. Sliding Roof System


      1. The sliding roof system uses a single glass panel to perform the tilt up-and-down and slide open-and-close operations.

    11. Entry and Start System


      1. The entry and start system is provided.

    12. Toyota Safety Sense


      1. System that are included in the "Toyota Safety Sense" are as follows:


        • Pre-crash System (PCS)

        • Dynamic radar cruise control

        • Lane Departure Alert (LDA)

        • Road Sign Assist (RSA)

        • Automatic High Beam (AHB)

    13. Monitor System


      1. To assist the driver in parking the vehicle by monitoring the area behind it, the rear view monitor system has a rear television camera assembly mounted on the back door.

    14. Blind Spot Monitor System


      1. The blind spot monitor system is provided.

    15. Mirror System


      1. The mirror heater system is provided.

    16. TOYOTA Parking Assist-sensor System


      1. The TOYOTA parking assist-sensor system is provided.

    17. Parking Assist Monitor System


      1. The parking assist monitor system is provided.

    18. Panoramic View Monitor System


      1. The panoramic view monitor system is provided.

    19. Cruise Control System


      1. The cruise control system is provided.

    20. Dynamic Radar Cruise Control System


      1. The dynamic radar cruise control system is provided.

    21. Lane Departure Alert System


      1. The lane departure alert system is provided.

    22. Road Sign Assist System


      1. The road sign assist system is provided.

    23. Automatic Light Control System


      1. The automatic light control system is provided.

    24. Light Automatic Turn-off System


      1. The light automatic turn-off system is provided.

    25. Light Emitting Diode (LED) Headlight System


      1. The Light Emitting Diode (LED) headlight system is provided.

    26. Automatic Headlight Beam Level Control System


      1. The automatic headlight beam level control system is provided.

    27. Manual Headlight Beam Level Control System


      1. The manual headlight beam level control system is provided.

    28. Emergency Brake Signal


      1. The hazard warning signal lights flash automatically in the case of emergency braking to alert following drivers, thus helping to reduce rear-end accidents.

    29. Daytime Running Light


      1. The daytime running light system is provided.

    30. Automatic High Beam (AHB) System


      1. The AHB system is provided.

    31. Illuminated Entry System


      1. The illuminated entry system is provided.

    32. Power Back Door System


      1. The power back door system is provided.

    33. Power Door Lock System


      1. The power door lock system is provided.

    34. Heated Windshield Defroster System


      1. The heated windshield defroster system use a heater element in the windshield glass to help reduce the formation of ice where the windshield.

    35. Windshield Deicer System


      1. The windshield deicer system uses a heater element in the windshield glass to help reduce the formation of ice where the front wipers rest.

    36. Window Defogger System


      1. The window defogger system uses a heater wire on the back door glass.

    37. Wiper and Washer System


      1. The front wiper system which uses a raindrop sensing function is used.

      2. The low washer fluid warning function is used.

      3. The washer nozzle heater function is used.

    38. Air Conditioning System


      1. The automatic air conditioning system or manual air conditioning system is provided.

    39. Power Outlet Socket System


      1. The power outlet socket system is designed for use as a power supply for electrical appliances in the vehicle.

      2. DC 12 V power outlet socket assemblies are located in the lower portion of the instrument panel and the rear of the console box sub-assembly rear.

    40. Combination Meter Assembly


      1. Depending on the grade, a segment Liquid Crystal Display (LCD) type combination meter or color Thin Film Transistor (TFT) type combination meter is made available.

      2. Ornamentation is placed on various parts of the combination meter to express a sense of high quality.

        Figure 3. Segment LCD Type Meter

        A01V2I9C01
        *1 Segment LCD - -
        *a Silver Painting Ring - -

        Figure 4. TFT Type Meter

        A01V28QC01
        *1 4.2 inch Color TFT - -
        *a Vapor Deposition and Mask Printing Ring *b Gradation Printing

    41. Supplemental Restraint System


      1. The Supplemental Restraint System (SRS) driver and front passenger airbags are used as supplements to the seat belts to help reduce the shocks to the head and chest of the driver or front passenger in the event of a frontal collision.

      2. The SRS knee airbags are used as a supplement to the seat belt to help reduce the shock to the knee of the driver in the event of a frontal collision.

      3. The SRS front seat side airbags are used during a side collision to help reduce the impact to the chests of the driver and front passenger.

      4. The SRS curtain shield airbags are used in the event of a side or side rear collision to help reduce the impact to the heads of the front passenger or rear passengers.

      5. The SRS seat cushion airbags (front seat cushion airbag assembly RH) are used as a supplement to the seat belts to prevent the driver and front passenger from sliding forward in the event of a front impact collision.

    42. Color


      1. Color List

        Models for Europe
        Exterior Color Interior Color
        Color No. Color Name Color Name
        040 Super White 2

        • Gray

        • Black

        • Tan

        • Beige
        070 White Pearl Crystal Shine
        1D6* Silver Metallic
        1G3 Gray Metallic
        209 Black Mica
        221* Blackish Ageha Glass Flake
        3T0 Dark Red Mica Metallic
        4T3 Bronze Mica Metallic
        4U5 Dark Brown Metallic

        • *: Flex tone-compatible

        Except models for Europe
        Exterior Color Interior Color
        Color No. Color Name Color Name
        040 Super White 2

        • Gray

        • Black

        • Tan

        • Beige
        070 White Pearl Crystal Shine
        1D6 Silver Metallic
        1G3 Gray Metallic
        209 Black Mica
        221 Blackish Ageha Glass Flake
        3T0 Dark Red Mica Metallic
        4T3 Bronze Mica Metallic
        4U5 Dark Brown Metallic
        8X7 Blue Metallic