WIRELESS DOOR LOCK CONTROL SYSTEM


  1. FUNCTION


    1. The wireless door lock control system has the following functions:

      Function Outline
      All Doors Lock Pressing the lock button of the door control transmitter sub-assembly locks all doors and the back door.
      All Doors Unlock Pressing the unlock button of the door control transmitter sub-assembly unlocks all doors and the back door.
      All Doors Unlock (2-step Unlock)*1 Pressing the unlock button on the door control transmitter sub-assembly once unlocks the driver door, and pressing it again within 5 seconds unlocks all the doors.
      Power Back Door Open or Close*2 Pressing the power back door button for approx. 1 second opens and closes the power back door.
      Automatic Lock If none of the doors are opened for 30 seconds after being unlocked by the wireless door lock control, all the doors are locked again automatically.
      Answer Back

      • When the doors are being locked or unlocked using the door control transmitter sub-assembly, the wireless door lock buzzer sounds*1 and the hazard warning lights blink once while locking and twice while unlocking.

      • When the power back door is opened and closed by using the door control transmitter sub-assembly, the hazard warning lights blink twice as an answer back.*3
      Door Ajar Warning*1 If any door is open or ajar, pressing the lock button of the door control transmitter sub-assembly will cause the wireless door lock buzzer to sound for about 5 seconds.
      Panic Alarm*1

      Keeping the panic button on the door control transmitter sub-assembly pressed for longer than 1 seconds causes the following alarm functions to be activated.


      • Sounds the vehicle horn.

      • Flashes the hazard lights, headlights, and taillights.

      • Illuminates the interior lights (if the interior light switch is in the DOOR position).
      Power Back Door Reserve Lock*2 When a door other than the power back door is closed and the door lock is operated by electrical key transmitter sub-assembly during auto close operation, a door lock operation is performed at that time. The door lock operation completes when the power back door close operation ends.
      Customization The on or off setting of some functions and settings can be performed using the Global TechStream (GTS). In addition, some functions are not available depending on specification. For details, refer to the Repair Manual.

      • *1: Models for Korea

      • *2: Models with power back door system

      • *3: Except models for Europe

  2. DIAGNOSIS


    1. If there is a malfunction in the system, the main body ECU stores the Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual.