REAR BUMPER(for Sedan) REMOVAL

PROCEDURE

  1. REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

    Click here

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

    Tip:

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY

    1. B350522C01
      V100155

      Protective Tape

      Put protective tape around the rear bumper assembly.

    2. B350523

      Remove the 2 screws.

    3. w/o Under cover:

      1. B356994

        Using a clip remover, remove the 4 clips.

    4. w/ Under Cover:

      1. B356993

        Using a clip remover, remove the 7 clips.

    5. B350526

      Remove the clip and screw.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. B350527

      Disengage the 6 claws as shown in the illustration.

      Tip:

      Use the same procedure for the RH side and LH side.

    7. B350528

      Disengage the 4 claws as shown in the illustration.

    8. w/ TOYOTA Parking Assist-sensor System:

      1. Disconnect the connector.

    9. Remove the rear bumper assembly.