METER / GAUGE SYSTEM TERMINALS OF ECU

  1. COMBINATION METER ASSEMBLY

    E238019E11
    1. Measure the voltage and resistance according to the value(s) in the table below.

      Terminal No. (Symbol)

      Wiring Color

      Terminal Description

      Condition

      Specified Condition

      E46-1 (RLMT)*1 - Body ground

      G - Body ground

      Rear seat belt indicator light LH signal

      Ignition switch ON, rear seat belt indicator light LH off

      11 to 14 V

      Ignition switch ON, rear seat belt indicator light LH on

      Below 1 V

      E46-2 (RCMT)*1 - Body ground

      L - Body ground

      Rear seat belt indicator light center signal

      Ignition switch ON, rear seat belt indicator light center off

      11 to 14 V

      Ignition switch ON, rear seat belt indicator light center on

      Below 1 V

      E46-3 (RRMT)*1 - Body ground

      R - Body ground

      Rear seat belt indicator light RH signal

      Ignition switch ON, rear seat belt indicator light RH off

      11 to 14 V

      Ignition switch ON, rear seat belt indicator light RH on

      Below 1 V

      E46-5 (SI) - Body ground

      R - Body ground

      Speed signal for other system (Input)

      Ignition switch ON, wheel being rotated

      Pulse generation (See waveform 1)

      E46-6 (+S) - Body ground

      V - Body ground

      Speed signal for other system (Output)

      Ignition switch ON, wheel being rotated

      Pulse generation (See waveform 1)

      E46-7 (P/SB) - Body ground

      L - Body ground

      Front passenger seat belt buckle switch signal

      Ignition switch ON, front passenger seat occupied, and front passenger seat belt unfastened

      Below 1 V

      Ignition switch ON, front passenger seat occupied, and front passenger seat belt fastened

      11 to 14 V

      E46-8 (S)*2 - Body ground

      GR - Body ground

      Fuel sediment warning signal

      Ignition switch ON, fuel sediment warning light off or "DRAIN WATER FROM FUEL FILTER" not displayed

      11 to 14 V

      Ignition switch ON, fuel sediment warning light on or "DRAIN WATER FROM FUEL FILTER" displayed

      Below 1 V

      E46-9 (S)*3 - Body ground

      V - Body ground

      Oil pressure signal

      Idling

      11 to 14 V

      Ignition switch ON

      Below 1 V

      E46-11 (CHK) - Body ground

      LG - Body ground

      MIL (Check engine warning light) signal

      Ignition switch ON, MIL off

      11 to 14 V

      Ignition switch ON, MIL on

      Below 1 V

      E46-12 (SW) - Body ground

      Y - Body ground

      Brake fluid level signal

      Ignition switch ON, brake fluid level not low

      11 to 14 V

      Ignition switch ON, brake fluid level low

      Below 1 V

      E46-13 (CHG-)*4 - Body ground

      G - Body ground

      Charge warning signal

      Ignition switch ON, charge warning light off or "Charge warning (Charge warning symbol)" not displayed

      Below 1 V

      Ignition switch ON, charge warning light on or "Charge warning (Charge warning symbol)" displayed

      11 to 14 V

      E46-14 (-) - Body ground

      W-B - Body ground

      Ground

      Always

      Below 1 Ω

      E46-16 (L) - E46-15 (E)

      V - BR

      Fuel level signal

      Ignition switch ON, fuel level warning off

      Below 1 V

      Ignition switch ON, fuel level warning on

      4.5 to 9 V

      E46-19 (+) - Body ground

      R - Body ground

      High beam signal

      Ignition switch ON, high beam off

      Below 1 V

      Ignition switch ON, high beam on

      11 to 14 V

      E46-21 (ET) - Body ground

      BR - Body ground

      Ground

      Always

      Below 1 Ω

      E46-22 (BRQ)*5 - Body ground

      GR - Body ground

      Transmission control ECU assembly communication line

      Always

      Below 1.44 V

      E46-23 (TX+)*5 - Body ground

      LG - Body ground

      Transmission control ECU assembly communication line

      Ignition switch ON

      Pulse generation (See waveform 2)

      E46-24 (RLSB)*1 - Body ground

      Y - Body ground

      Rear seat belt buckle switch LH signal

      Ignition switch ON, rear seat belt buckle switch LH unfastened

      Below 1 V

      Ignition switch ON, rear seat belt buckle switch LH fastened

      11 to 14 V

      E46-25 (RCSB)*1 - Body ground

      L - Body ground

      Rear seat belt buckle switch center signal

      Ignition switch ON, rear seat belt buckle switch center unfastened

      Below 1 V

      Ignition switch ON, rear seat belt buckle switch center fastened

      11 to 14 V

      E46-26 (RRSB)*1 - Body ground

      R - Body ground

      Rear seat belt buckle switch RH signal

      Ignition switch ON, rear seat belt buckle switch RH unfastened

      Below 1 V

      Ignition switch ON, rear seat belt buckle switch RH fastened

      11 to 14 V

      E46-27 (OILW)*2 - Body ground

      SB - Body ground

      Oil level signal

      Ignition switch ON, oil level not low

      11 to 14 V

      Ignition switch ON, oil level low

      Below 1 V

      E46-28 (SW1)*6 - Body ground

      B - Body ground

      Steering pad switch assembly (DISP switch) signal

      Ignition switch ON, DISP switch not pressed

      4 to 5 V

      Ignition switch ON, DISP switch pressed

      Below 1 V

      E46-29 (TWS2)*7 - Body ground

      P - Body ground

      Temperature switch signal

      Ignition switch ON, water temperature hot warning light off

      4.9 to 5.1 V

      Ignition switch ON, water temperature hot warning light on

      Below 1 V

      E46-31 (CANL) - Body ground

      W - Body ground

      CAN communication line

      -

      -

      E46-32 (CANH) - Body ground

      LG - Body ground

      CAN communication line

      -

      -

      E46-35 (TX1+) - E46-34 (TX1-)

      G - W

      Ambient temperature sensor signal

      Ignition switch ON

      4.4 to 5.6 V

      E46-39 (IG+) - Body ground

      P - Body ground

      Ignition switch signal

      Ignition switch off

      Below 1 V

      Ignition switch ON

      11 to 14 V

      E46-40 (B) - Body ground

      W - Body ground

      Battery

      Always

      11 to 14 V

      E45-1 (B) - Body ground

      B - Body ground

      Battery

      Always

      11 to 14 V

      E45-3 (HAZ) - Body ground

      GR - Body ground

      Hazard warning switch signal

      Ignition switch ON, hazard warning switch not pressed

      11 to 14 V

      Ignition switch ON, hazard warning switch pressed

      Below 1 V

      E45-7 (LR) - Body ground

      L - Body ground

      RH turn indicator light signal (Output)

      Ignition switch ON, RH turn indicator light off

      Below 1 V

      Ignition switch ON, RH turn indicator light blinks

      11 to 14 V ←→ Below 1 V

      E45-9 (ER) - Body ground

      P - Body ground

      RH turn indicator light signal (Input)

      Ignition switch ON, RH turn signal switch off

      11 to 14 V

      Ignition switch ON, RH turn signal switch on

      Below 1 V

      E45-10 (EL) - Body ground

      LG - Body ground

      LH turn indicator light signal (Input)

      Ignition switch ON, LH turn signal switch off

      11 to 14 V

      Ignition switch ON, LH turn signal switch on

      Below 1 V

      E45-11 (S) - Body ground

      R - Body ground

      Rear fog indicator light signal

      Ignition switch ON, rear fog indicator light off

      Below 1 V

      Ignition switch ON, rear fog indicator light on

      11 to 14 V

      E45-12 (FOG)*8 - Body ground

      G - Body ground

      Front fog indicator light signal

      Ignition switch ON, front fog indicator light off

      Below 1 V

      Ignition switch ON, front fog indicator light on

      11 to 14 V

      E45-13 (LL) - Body ground

      Y - Body ground

      LH turn indicator light signal (Output)

      Ignition switch ON, LH turn indicator light off

      Below 1 V

      Ignition switch ON, LH turn indicator light blinks

      11 to 14 V ←→ Below 1 V

      • *1: w/ Rear seat belt warning

      • *2: for Diesel

      • *3: for Gasoline

      • *4: w/o Generator control ECU assembly

      • *5: for Multi-mode manual transaxle

      • *6: w/ Steering pad switch

      • *7: w/ Exhaust heat recirculation system

      • *8: w/ Front fog light

      1. E267248N01

        Waveform 1 (Reference):

        Item

        Condition

        Tool setting

        5 V/DIV., 20 ms./DIV.

        Vehicle condition

        Ignition switch ON, wheel being rotated

        Tip:

        When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.

      2. D105744E01

        Waveform 2 (Reference):

        Item

        Condition

        Tool setting

        2 V/DIV., 500 μs/DIV.

        Vehicle condition

        Ignition switch ON