FRONT BUMPER DISASSEMBLY

PROCEDURE


  1. REMOVE FRONT SPOILER

    Click here

  2. REMOVE HEADLIGHT CLEANER WASHER NOZZLE LH (w/ Headlight Cleaner System)

    Click here

  3. REMOVE HEADLIGHT CLEANER WASHER NOZZLE RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)

    Click here

  5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  6. REMOVE ULTRASONIC SENSOR CLIP (w/ Intelligent Parking Assist System)

    Click here

  7. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intelligent Parking Assist System)

    Click here

  8. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intelligent Parking Assist System)

    Click here

  9. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY LH

    Click here

  10. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  11. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

    Click here

  12. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  13. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. A005CZB

      Remove the 2 screws and front bumper extension mounting bracket.

    2. Disengage the 2 claws and remove the front bumper extension mounting bracket.

  14. REMOVE HOOD TO FRONT END PANEL SEAL


    1. A005AYQE01
      Text in Illustration
      *1 Double-sided Tape

      Disengage the 2 clips and remove the hood to front end panel seal.

  15. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. A005C5Q

      Disengage the 9 clamps and remove the headlight cleaner hose.

  16. REMOVE NO. 3 ENGINE ROOM WIRE


    1. A005AFT

      Disengage the 8 clamps and remove the No. 3 engine room wire.

  17. REMOVE FRONT BUMPER EMBLEM SUB-ASSEMBLY


    1. A005D4B

      Remove the 2 screws.

    2. Disengage the 4 claws and 2 pins, and remove the front bumper emblem sub-assembly.

  18. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    1. A005EIF

      Remove the 2 screws.

    2. Remove the 4 clips.

    3. A005BG4

      Disengage the 14 claws and guide, and remove the radiator grille sub-assembly.

  19. REMOVE FRONT FENDER LINER RETAINER


    1. A005DU6

      Disengage the claw and remove the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  20. REMOVE FRONT BUMPER HOLE COVER LH


    1. A005EIOE02
      Text in Illustration
      *1 Hook

      Disengage the 2 claws.

    2. Disengage the hook and remove the front bumper hole cover LH.

  21. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  22. REMOVE FOG LIGHT COVER LH


    1. A005EY0

      Disengage the 7 claws and remove the fog light cover LH.

  23. REMOVE FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  24. REMOVE NO. 1 LOWER RADIATOR GRILLE


    1. A005E2T

      Disengage the 16 claws and remove the No. 1 lower radiator grille.

  25. REMOVE FRONT BUMPER SEAL


    1. A005A9HE02
      Text in Illustration
      *1 Double-sided Tape

      Remove the front bumper seal.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  26. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A005E6V

      Disengage the 4 guides and remove the front bumper energy absorber.

  27. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A005APL

      Using a clip remover, disengage the 3 clamps.

    2. Remove the 6 bolts.

    3. Disengage the claw and remove the front bumper reinforcement sub-assembly.

  28. REMOVE FRONT BUMPER SIDE SUPPORT LH


    1. A005DEPE01
      Text in Illustration
      *1 Bolt
      *2 Screw

      Remove the bolt and screw.

    2. Disengage the 2 claws and remove the front bumper side support LH.

  29. REMOVE FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure as for the LH side.

  30. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH


    1. A005AUL

      Remove the 4 bolts.

    2. Disengage the guide and remove the front side member bracket sub-assembly LH.

  31. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.