ROOM LIGHT ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE NO. 1 ROOM LIGHT ASSEMBLY


    1. A01E0U3

      Using a screwdriver, detach the 4 claws and remove the lens.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01DYEV

      Remove the 2 screws and room light.

    3. Disconnect the lamp connector.

  3. REMOVE NO. 1 ROOM LIGHT BULB


    1. Remove the bulb from the room light.