ECD SYSTEM (w/ EGR Cooler), Diagnostic DTC:P0101

DTC Code DTC Name
P0101 Mass or Volume Air Flow Circuit Range / Performance Problem

DESCRIPTION

Refer to DTC P0100 Click here.

DTC No. DTC Detection Condition Trouble Area
P0101

After engine is warmed up, condition (a) continues for more than 10 seconds at idling:

(2 trip detection logic)

(a) Mass air flow meter output more than 2.2 V

 Mass air flow meter

Conditions (a) and (b) continue for more than 6 seconds with engine speed at 2,000 rpm or more:

(2 trip detection logic)

(a) VTA more than 0.1 V

(b) Mass air flow meter output less than 0.25 V

INSPECTION PROCEDURE

Tech Tips

Read freeze frame data using the intelligent tester. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.

PROCEDURE


  1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0101)


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch ON and turn the tester ON.

    3. Select the following menu items: Powertrain / Engine and ECT / DTC.

    4. Read DTCs.

      Result
      Display (DTC Output) Proceed to
      P0101 and other DTCs A
      P0101 B

      Tech Tips

      If codes other than P0101 are output, perform troubleshooting for those DTCs first.


    B

    REPLACE MASS AIR FLOW METER

    A

    GO TO DTC CHART