ULTRASONIC SENSOR(for Rear) INSPECTION

PROCEDURE

  1. INSPECT NO. 1 ULTRASONIC SENSOR

    E198662E02

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (E) - 2 (S)

      Always

      20 to 40 kΩ

      If the result is not as specified, replace the No. 1 ultrasonic sensor.

      Table 1. Text in Illustration

      *1

      Component without harness connected

      (No. 1 Ultrasonic Sensor)