DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. The front drive shaft assembly uses a tripod type Constant Velocity (CV) joint on the differential side, and a Rzeppa type CV joint on the wheel side.

    2. The front drive shaft assembly RH uses a tubular shaft center section in order to realize a lightweight design.

      A0050UJE01
      Text in Illustration
      *1 Rzeppa Type CV Joint *2 Tripod Type CV Joint
      *3 Front Drive Shaft Assembly LH *4 Front Drive Shaft Assembly RH
      A00515J Wheel Side A0051E0 Differential Side