REAR WIPER MOTOR INSPECTION

PROCEDURE

  1. INSPECT REAR WIPER MOTOR ASSEMBLY

    1. E196889C01

      *a

      Component without harness connected

      (Rear Wiper Motor Assembly)

      Check the wiper continuous operation.

      1. Check that the rear wiper motor assembly operates when the battery voltage is applied between the terminals.

        Specified Condition

        Tester Connection

        Specified Condition

        Battery positive (+) → Terminal 5 (+B)

        Battery negative (-) → Terminal 2 (LS)

        Battery negative (-) → Terminal 3 (E)

        Motor operates at low speed (LO)

        If the result is not as specified, replace the motor assembly.

    2. E196889C02

      *a

      Component without harness connected

      (Rear Wiper Motor Assembly)

      Check the wiper intermittent operation.

      1. Check that the rear wiper motor assembly operates when the battery voltage is applied between the terminals.

        Specified Condition

        Tester Connection

        Specified Condition

        Battery positive (+) → Terminal 5 (+B)

        Battery negative (-) → Terminal 4 (C1)

        Battery negative (-) → Terminal 3 (E)

        Rear wiper motor operates intermittently

        If the result is not as specified, replace the motor assembly.