FUEL PUMP(for High Pressure) ON-VEHICLE INSPECTION

PROCEDURE

1. FUEL PUMP ASSEMBLY

   
   

   1. Check fuel pressure.

      
      

      1. Connect the GTS to the DLC3.

      2. Start the engine.

      3. Turn the GTS on.

      4. Enter the following menus: Powertrain / Engine / Active Test / Control the Target Fuel Pressure Offset / Fuel Pressure (High).

         
         Powertrain > Engine > Active Test

         Active Test Display
         Control the Target Fuel Pressure Offset

         Data List Display
         Fuel Pressure (High)

      5. Check that the fuel pressure fluctuates when the target fuel pressure changes.

         Tech Tips

         The target fuel pressure operation lowers the target fuel pressure by 12.5% or increases the target fuel pressure by 24.8%.

         If the result is not as specified, replace the fuel pump assembly or fuel delivery pipe (fuel pressure sensor).

   2. Check operating sound.

      
      

      1. Remove the No. 1 engine cover sub-assembly.

         Click here

      2. Start the engine.

      3. Using a sound scope, check the operating sound of the pump.

         If no sound can be heard, check the fuel pump assembly, wire harness and ECM.

      4. Stop the engine.

      5. Reinstall the No. 1 engine cover sub-assembly.

         Click here