CHARGING SYSTEM Charge Warning Light Comes ON while Driving

PROCEDURE

1. CHECK LOCK FUNCTION OF GENERATOR PULLEY WITH CLUTCH

   1. Check the lock function with the pulley installed in the vehicle.

      1. Visually check that the rotor in the generator operates with the engine running.

   2. 

      	Free
      	Lock

      Check the lock function with the pulley removed from the vehicle.

      1. Remove the generator pulley cap.

      2. Hold the generator rotor using SST, and turn the generator pulley with clutch clockwise to check that the outer ring locks.

         OK

         The outer ring locks.

   09820-63021

   Result

   OK

   NG

   NG

   REPLACE GENERATOR PULLEY WITH CLUTCH

   Click hereClick hereClick here

   OK

2. CHECK INSTALLATION OF GENERATOR PULLEY WITH CLUTCH

   1. Start the engine and visually check the generator pulley with clutch for looseness.

      OK

      The generator pulley with clutch is not loose.

   Result

   OK

   NG

   OK

   REPLACE GENERATOR ASSEMBLY

   Click hereClick hereClick here

   NG

   TIGHTEN GENERATOR PULLEY WITH CLUTCH TO THE SPECIFIED TORQUE

   Click hereClick hereClick here