CONDENSER(for 1WW) REASSEMBLY

PROCEDURE

  1. INSTALL COOLER DRYER

    1. E145287

      Using pliers, install a new cooler dryer to the modulator.

    2. Install a new O-ring to a new cap.

    3. E101932

      Apply sufficient compressor oil to the O-ring and cap fitting surface.

      for HFC-134a(R134a): Compressor oil

      ND-OIL 8 or equivalent

      for HFO-1234yf(R1234yf): Compressor oil

      ND-OIL 12 or equivalent

    4. E145288

      Using a 14 mm hexagon wrench, install the cap to the modulator.

      2.9 N*m

      30 kgf*cm

      26 in.*lbf

  2. INSTALL NO. 1 COOLER CONDENSER CUSHION

    1. E143925

      Install the 4 No. 1 cooler condenser cushions.