BACK-UP LIGHT SWITCH INSPECTION

PROCEDURE

  1. INSPECT BACK-UP LIGHT SWITCH ASSEMBLY

    1. C163511C09

      *a

      Component without harness connected

      (Back-up Light Switch Assembly)

      *b

      Pushed

      *c

      Released

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 - 2

      Pushed

      Below 1 Ω

      1 - 2

      Released

      10 kΩ or higher

      If the result is not as specified, replace the back-up light switch assembly.