WASHER NOZZLE(for Front Side) REMOVAL

PROCEDURE

  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY

    1. E260666C02

      *a

      Protective Tape

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Note:

      Be careful not to damage the windshield.

      Tip:

      • Use the same procedure for the LH side and RH side.

      • Tape the screwdriver tip before use.

    2. E260667

      Remove the washer nozzle sub-assembly from the washer hose.

      Note:

      Washer nozzle sub-assemblies cannot be reused.

      Tip:

      Use the same procedure for the LH side and RH side.