STARTER(for Transaxle M/T with Stop and Start System) COMPONENTS

*1	FLYWHEEL HOUSING SIDE COVER	*2	NO. 1 ENGINE UNDER COVER
*3	STARTER ASSEMBLY	*4	TERMINAL CAP
	Nm (kgfcm, ft.*lbf): Specified torque	-	-

*1	MAGNET STARTER SWITCH ASSEMBLY	*2	PLANETARY GEAR
*3	STARTER ARMATURE ASSEMBLY	*4	STARTER ARMATURE PLATE
*5	STARTER BRUSH HOLDER ASSEMBLY	*6	STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY
*7	STARTER COMMUTATOR END FRAME ASSEMBLY	*8	STARTER YOKE ASSEMBLY
*9	RUBBER SEAL	*10	STARTER DRIVE HOUSING ASSEMBLY
*11	PINION DRIVE LEVER	-	-
	Nm (kgfcm, ft.*lbf): Specified torque		High-temperature grease

*1

MAGNET STARTER SWITCH ASSEMBLY

*2

PLANETARY GEAR

*3

STARTER ARMATURE ASSEMBLY

*4

STARTER ARMATURE PLATE

*5

STARTER BRUSH HOLDER ASSEMBLY

*6

STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY

*7

STARTER COMMUTATOR END FRAME ASSEMBLY

*8

STARTER YOKE ASSEMBLY

*9

RUBBER SEAL

*10

STARTER DRIVE HOUSING ASSEMBLY

*11

PINION DRIVE LEVER

-

N*m (kgf*cm, ft.*lbf): Specified torque

High-temperature grease