METER GAUGE AND WARNING/INDICATOR LIGHT (for 1TR-FE)
| Item | Signal Description |
|---|---|
| Speedometer | Calculates vehicle speed based on signal from vehicle speed sensor |
| Tachometer*1 | Calculates engine speed based on signal from ECM |
| ODO/TRIP Meter | Calculates distance vehicle is driven or distance since trip meter knob is pressed |
| Fuel | Indicates remaining amount of fuel based on signal from fuel sender gauge |
| Engine Coolant Temperature | Indicates engine coolant temperature based on signal from ECM |
| Item | Signal Description |
|---|---|
| TURN | Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON |
| HIGH BEAM | Illuminates when headlight dimmer switch is set to HI BEAM or FLASH |
| CHARGE | Illuminates when receiving malfunction signal from generator |
| OIL PRESSURE | Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal |
| MIL | Illuminates when receiving malfunction signal from ECM |
| DOOR | Illuminates when receiving each door courtesy switch signal |
| SEAT BELT*2 | Blinks when driver's seat belt buckle switch is unfastened |
| BRAKE | Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON |
| ABS*2 | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| SRS*3 | Illuminates when receiving malfunction signal from center airbag sensor assembly |
| FUEL | Illuminates when receiving fuel empty signal from fuel sender gauge |
| FR FOG*4 | Illuminates when receiving fog light switch signal |
| SPEED ALARM*5 | Illuminates when vehicle speed 120 km/h (74 mph) or more |
| RR FOG*6 | Illuminates when receiving rear fog light switch signal |
| Item | Signal Description |
|---|---|
| Vehicle Speed Reminder*7 | Buzzer is ON when vehicle speed is 120 km/h (74 mph) or more |
| Key Reminder*8 | Buzzer is ON when ignition switch is off, key is inserted and driver side door is open |
| Light Reminder*9 | Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD and driver side door is open |
| Seat Belt Reminder*10 | Buzzer is ON when ignition switch ON and driver side seat belt is unfastened |
*1: w/ Tachometer
*2: w/ Seat Belt Warning System
*3: w/ ABS
*4: w/ Airbag System
*5: w/ Front Fog Light
*6: w/ Rear Fog Light
*7: w/ Vehicle Speed Reminder
*8: w/ Key Reminder Warning System
*9: w/ Light Reminder Warning System
*10: w/ Seat Belt Reminder
METER GAUGE AND WARNING/INDICATOR LIGHT (for 2TR-FE)
| Item | Signal Description |
|---|---|
| Speedometer | Calculates vehicle speed based on signal from vehicle speed sensor |
| Tachometer*1 | Calculates engine speed based on signal from ECM |
| ODO/TRIP Meter | Calculates distance vehicle is driven or distance since trip meter knob is pressed |
| Fuel | Indicates remaining amount of fuel based on signal from fuel sender gauge |
| Engine Coolant Temperature | Indicates engine coolant temperature based on signal from ECM |
| Item | Signal Description |
|---|---|
| TURN | Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON |
| HIGH BEAM | Illuminates when headlight dimmer switch is set to HI BEAM or FLASH |
| CHARGE | Illuminates when receiving malfunction signal from generator |
| OIL PRESSURE | Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal |
| MIL | Illuminates when receiving malfunction signal from ECM |
| DOOR | Illuminates when receiving each door courtesy light switch signal |
| SEAT BELT*2 | Blinks when driver's seat belt buckle switch is unfastened |
| BRAKE | Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON |
| ABS*3 | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| SRS*4 | Illuminates when receiving malfunction signal from center airbag sensor assembly |
| FUEL | Illuminates when receiving fuel empty signal from fuel sender gauge |
| 4WD*5 | Illuminates when changing drivetrain from 2WD to 4WD |
| A/T OIL TEMP*5, *6 | Illuminates when receiving ATF temperature is too high signal from ECM |
| A/T P*5, *6 | Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal |
| FR FOG*7 | Illuminates when receiving fog light switch signal |
| SPEED ALARM*8 | Illuminates when vehicle speed 120 km/h (74 mph) or more |
| RR FOG*9 | Illuminates when receiving rear fog light switch signal |
| REAR DIFFERENTIAL LOCK*10 | Illuminates when receiving rear differential lock signal from the rear differential lock detection switch |
| TAIL*11 | Illuminates when light control switch is set to TAIL or HEAD |
| P*6 | Illuminates when receiving P signal from park / neutral position switch |
| R*6 | Illuminates when receiving R signal from park / neutral position switch |
| N*6 | Illuminates when receiving N signal from park / neutral position switch |
| D*6 | Illuminates when receiving D signal from shift lock control ECU |
| 3*6 | Illuminates when receiving 3 signal from shift lock control ECU |
| 2*6 | Illuminates when receiving 2 signal from park / neutral position switch |
| L*6 | Illuminates when receiving L signal from park / neutral position switch |
| Item | Signal Description |
|---|---|
| Vehicle Speed Reminder*8 | When vehicle speed is 120 km/h (74 mph) or more, buzzer sounds |
| Key Reminder*12 | Buzzer is ON when ignition switch is off, key is inserted and driver side door is open |
| Light Reminder*13 | Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open |
| Seat Belt Reminder*14 | Buzzer is ON when ignition switch ON and driver side seat belt is unfastened |
| Seat Belt Reminder*15 | Buzzer is ON when vehicle speed 15 km/h (9 mph) or more and driver side seat belt is unfastened |
*1: w/ Tachometer
*2: w/ Seat Belt Warning System
*3: w/ ABS
*4: w/ Airbag System
*5: for 4WD
*6: for Automatic Transmission
*7: w/ Front Fog Light
*8: w/ Vehicle Speed Reminder
*9: w/ Rear Fog Light
*10: w/ Rear Differential Lock System
*11: for Optitron Meter
*12: w/ Key Reminder Warning System
*13: w/ Light Reminder Warning System
*14: w/ Seat Belt Reminder
*15: for Australia
METER GAUGE AND WARNING/INDICATOR LIGHT (for 1GR-FE)
| Item | Signal Description |
|---|---|
| Speedometer | Calculates vehicle speed based on signal from vehicle speed sensor |
| Tachometer | Calculates engine speed based on signal from ECM |
| ODO/TRIP Meter | Calculates distance vehicle is driven or distance since trip meter knob is pressed |
| Fuel | Indicates remaining amount of fuel based on signal from fuel sender gauge |
| Engine Coolant Temperature | Indicates engine coolant temperature based on signal from ECM |
| Item | Signal Description |
|---|---|
| TURN | Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON |
| HIGH BEAM | Illuminates when headlight dimmer switch is set to HI BEAM or FLASH |
| CHARGE | Illuminates when receiving malfunction signal from generator |
| OIL PRESSURE | Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal |
| MIL | Illuminates when receiving malfunction signal from ECM |
| DOOR | Illuminates when receiving each door courtesy light switch signal |
| SEAT BELT | Blinks when driver's seat belt buckle switch is unfastened |
| BRAKE | Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON |
| ABS*1 | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| SRS | Illuminates when receiving malfunction signal from center airbag sensor assembly |
| FUEL | Illuminates when receiving fuel empty signal from fuel sender gauge |
| 4WD*2 | Illuminates when changing drivetrain from 2WD to 4WD |
| A/T OIL TEMP*2, *3 | Illuminates when receiving ATF temperature is too high signal from ECM |
| P*3 | Illuminates when receiving P signal from park / neutral position switch |
| R*3 | Illuminates when receiving R signal from park / neutral position switch |
| N*3 | Illuminates when receiving N signal from park / neutral position switch |
| D*3 | Illuminates when receiving D signal from shift lock control ECU |
| 4*3 | Illuminates when receiving 4 signal from shift lock control ECU |
| 3*3 | Illuminates when receiving 3 signal from shift lock control ECU |
| 2*3 | Illuminates when receiving 2 signal from park / neutral position switch |
| L*3 | Illuminates when receiving L signal from park / neutral position switch |
| A/T P*2, *3 | Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal |
| TAIL*4 | Illuminates when light control switch is set to TAIL or HEAD |
| CRUISE*5 | Illuminates when receiving cruise control system is operating properly signal from ECM |
| FR FOG*6 | Illuminates when receiving fog light switch signal |
| REAR DIFFERENTIAL LOCK*7 | Illuminates when receiving rear differential lock signal from the rear differential lock detection switch |
| VSC OFF*8 | Illuminates when receiving VSC OFF signal from skid control ECU with actuator |
| SLIP*8 | Illuminates when receiving SLIP signal from skid control ECU with actuator |
| Item | Signal Description |
|---|---|
| Key Reminder*9 | Buzzer is ON when ignition switch is off, key is inserted and driver side door is open |
| Light Reminder | Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open |
| Seat Belt Reminder*10 | Buzzer is ON when vehicle speed 15 km/h (9 mph) or more and driver side seat belt is unfastened |
*1: w/ ABS
*2: for 4WD
*3: for Automatic Transmission
*4: for Optitron Meter
*5: w/ Cruise Control System
*6: w/ Front Fog Light
*7: w/ Rear Differential Lock System
*8: w/ VSC
*9: w/ Key Reminder Warning System
*10: for Australia
METER GAUGE AND WARNING/INDICATOR LIGHT (for 1KD-FTV)
| Item | Signal Description |
|---|---|
| Speedometer | Calculates vehicle speed based on signal from vehicle speed sensor |
| Tachometer | Calculates engine speed based on signal from ECM |
| ODO/TRIP Meter | Calculates distance vehicle is driven or distance since trip meter knob is pressed |
| Fuel | Indicates remaining amount of fuel based on signal from fuel sender gauge |
| Engine Coolant Temperature | Indicates engine coolant temperature based on signal from ECM |
| Item | Signal Description |
|---|---|
| TURN | Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON |
| HIGH BEAM | Illuminates when headlight dimmer switch is set to HI BEAM or FLASH |
| CHARGE | Illuminates when receiving malfunction signal from generator |
| OIL PRESSURE | Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal |
| MIL | Illuminates when receiving malfunction signal from ECM |
| DOOR | Illuminates when receiving each door courtesy light switch signal |
| SEAT BELT | Blinks when driver's seat belt buckle switch is unfastened |
| BRAKE | Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch is ON |
| ABS*1 | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| GLOW | Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM |
| FUEL FILTER SEDIMENTER | Illuminates when receiving fuel filter switch signal or fuel sedimenter switch |
| SRS | Illuminates when receiving malfunction signal from center airbag sensor assembly |
| FUEL | Illuminates when receiving fuel empty signal from fuel sender gauge |
| T-BELT | Illuminates when odometer's display is 150000 km/h |
| 4WD*2 | Illuminates when changing drivetrain from 2WD to 4WD |
| A/T OIL TEMP*2, *3 | Illuminates when receiving ATF temperature is too high signal from TCM |
| P*3 | Illuminates when receiving P signal from park / neutral position switch |
| R*3 | Illuminates when receiving R signal from park / neutral position switch |
| N*3 | Illuminates when receiving N signal from park / neutral position switch |
| D*3 | Illuminates when receiving D signal from shift lock control ECU |
| 4*3, *5 | Illuminates when receiving 4 signal from shift control ECU |
| 3*3 |
|
| 2*4 |
|
| L*3 |
|
| A/T P*2, *3 | Illuminates when receiving transfer shift lever is on N and automatic transmission shift lever is on P signal |
| CRUISE*7 | Illuminates when receiving cruise control system is operating properly signal from ECM |
| TAIL*4 | Illuminates when light control switch is set to TAIL or HEAD |
| FR FOG*8 | Illuminates when receiving fog light switch signal |
| RR FOG*9 | Illuminates when receiving rear fog light switch signal |
| REAR DIFFERENTIAL LOCK*10 | Illuminates when receiving rear differential lock signal from the rear differential lock detection switch |
| OIL LEVEL*11 | Illuminates when receiving amount of engine oil is not sufficient signal for engine oil level sensor |
| OIL MAINTENANCE*12 | Illuminates when the receiving oil maintenance signal from ECM |
| VSC OFF*13 | Illuminates when receiving VSC OFF signal from skid control ECU with actuator |
| SLIP*13 | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| DPF*16 | Illuminates when the receiving DPF signal from ECM |
| Item | Signal Description |
|---|---|
| Key Reminder*14 | Buzzer is ON when ignition switch is off, key is inserted and driver side door is open |
| Light Reminder | Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open |
| Seat Belt Reminder*15 | Buzzer is ON when vehicle speed 15 km/h (9 mph) or more and driver side seat belt is unfastened |
*1: w/ ABS
*2: for 4WD
*3: for Automatic Transmission
*4: for Optitron Meter
*5: for A750F
*6: Except A750F
*7: w/ Cruise Control System
*8: w/ Front Fog Light
*9: w/ Rear Fog Light
*10: w/ Rear Differential Lock System
*11: w/ Oil Level Indicator Light
*12: w/ Oil maintenance Indicator Light
*13: w/ VSC
*14: w/ Key Reminder Warning System
*15: for Australia and Europe
*16: for DPF
METER GAUGE AND WARNING/INDICATOR LIGHT (for 2KD-FTV)
| Item | Signal Description |
|---|---|
| Speedometer | Calculates vehicle speed based on signal from vehicle speed sensor |
| Tachometer | Calculates engine speed based on signal from ECM |
| ODO/TRIP Meter | Calculates distance vehicle is driven or distance since trip meter knob is pressed |
| Fuel | Indicates remaining amount of fuel based on signal from fuel sender gauge |
| Engine Coolant Temperature | Indicates engine coolant temperature based on signal from ECM |
| Item | Signal Description |
|---|---|
| TURN | Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON |
| HIGH BEAM | Illuminates when headlight dimmer switch is set to HI BEAM or FLASH |
| CHARGE | Illuminates when receiving malfunction signal from generator |
| OIL PRESSURE | Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal |
| MIL | Illuminates when receiving malfunction signal from ECM |
| DOOR | Illuminates when receiving each door courtesy light switch signal |
| SEAT BELT*1 | Blinks when driver's seat belt buckle switch is unfastened |
| BRAKE | Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch is ON |
| ABS*2 | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| GLOW | Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM |
| FUEL FILTER SEDIMENTER | Illuminates when receiving fuel filter switch signal or fuel sedimenter switch |
| SRS*3 | Illuminates when receiving malfunction signal from center airbag sensor assembly |
| FUEL | Illuminates when receiving fuel empty signal from fuel sender gauge |
| T-BELT | Illuminates when odometer's display is 150000 km/h |
| FR FOG*4 | Illuminates when receiving front fog light switch signal |
| RR FOG*5 | Illuminates when receiving rear fog light switch signal |
| REAR DIFFERENTIAL LOCK*6 | Illuminates when receiving rear differential lock signal from the rear differential lock detection switch |
| OIL LEVEL*7 | Illuminates when receiving amount of engine oil is not sufficient signal for engine oil level sensor |
| OIL MAINTENANCE*8 | Illuminates when the receiving oil maintenance signal from ECM |
| SPEED ALARM*9 | Illuminates when vehicle speed 120 km/h (74 mph) or more |
| DPF*13 | Illuminates when the receiving DPF signal from ECM |
| VSC OFF*14 | Illuminates when receiving VSC OFF signal from skid control ECU with actuator |
| SLIP*14 | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| TAIL*15 | Illuminates when light control switch is set to TAIL or HEAD |
| 4WD*16 | Illuminates when changing drivetrain from 2WD to 4WD |
| CRUISE*17 | Illuminates when receiving cruise control system is operating properly signal from ECM |
| Item | Signal Description |
|---|---|
| Vehicle Speed Reminder*9 | When vehicle speed is 120 km/h (74 mph) or more, buzzer sounds |
| Key Reminder*10 | Buzzer is ON when ignition switch is off, key is inserted and driver side door is open |
| Light Reminder*10 | Buzzer is ON when ignition switch is off, light control switch is set to TAIL or HEAD, and driver side door is open |
| Seat Belt Reminder*11 | Buzzer is ON when vehicle speed 15 km/h (9 mph) or more and driver side seat belt is unfastened |
| Seat Belt Reminder*12 | Buzzer is ON when ignition switch ON and driver side seat belt is unfastened |
*1: w/ Seat Belt Warning System
*2: w/ ABS
*3: w/ Airbag System
*4: w/ Front Fog Light
*5: w/ Rear Fog Light
*6: w/ Rear Differential Lock System
*7: w/ Oil Level Indicator Light
*8: w/ Oil Maintenance Indicator Light
*9: w/ Vehicle Speed Reminder
*10: w/ Key Reminder Warning System
*11: for Australia and Europe
*12: for Middle East
*13: for DPF
*14: w/ VSC
*15: for Optitron Meter
*16: for 4WD
*17: w/ Cruise Control System
METER GAUGE AND WARNING/INDICATOR LIGHT (for 5L-E)
| Item | Signal Description |
|---|---|
| Speedometer | Calculates vehicle speed based on signal from vehicle speed sensor |
| Tachometer | Calculates engine speed based on signal from ECM |
| ODO/TRIP Meter | Calculates distance vehicle is driven or distance since trip meter knob is pressed |
| Fuel | Indicates remaining amount of fuel based on signal from fuel sender gauge |
| Engine Coolant Temperature | Indicates engine coolant temperature based on signal from ECM |
| Item | Signal Description |
|---|---|
| TURN | Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON |
| HIGH BEAM | Illuminates when headlight dimmer switch is set to HI BEAM or FLASH |
| CHARGE | Illuminates when receiving malfunction signal from generator |
| OIL PRESSURE | Illuminates when receiving oil press is abnormally low (pressure switch is ON) signal |
| MIL | Illuminates when receiving malfunction signal from ECM |
| DOOR | Illuminates when receiving each door courtesy light switch signal |
| SEAT BELT*1 | Blinks when driver's seat belt buckle switch is unfastened |
| BRAKE | Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON, or brake vacuum warning switch is ON |
| ABS*2 | Illuminates when receiving malfunction signal from skid control ECU with actuator |
| GLOW | Illuminates when receiving engine is too cold to start (glow heater is ON) signal from ECM |
| FUEL FILTER SEDIMENTER | Illuminates when receiving fuel filter switch signal or fuel sedimenter switch |
| SRS*3 | Illuminates when receiving malfunction signal from center airbag sensor assembly |
| FUEL | Illuminates when receiving fuel empty signal from fuel sender gauge |
| T-BELT | Illuminates when odometer's display is 150000 km/h |
| REAR DIFFERENTIAL LOCK*4 | Illuminates when receiving rear differential lock signal from the rear differential lock detection switch |
| FR FOG*5 | Illuminates when receiving front fog light switch signal |
| 4WD*6 | Illuminates when changing drivetrain from 2WD to 4WD |
*1: w/ Seat Belt Warning System
*2: w/ ABS
*3: w/ Airbag System
*4: w/ Rear Differential Lock System
*5: w/ Front Fog Light
*6: for 4WD
COMBINATION METER HAS FOLLOWING FEATURES
Built-in buzzer for the reminder system (light*1, key*2, seat belt*3 and vehicle speed*4)
The warning buzzer sounds when: 1) a key is in the ignition key cylinder, the ignition switch is off and the driver side door is open*1; 2) the light control switch is set to TAIL or HEAD, the ignition switch is off and the driver side door is open*2; 3) the vehicle speed 15 (9 mph) or more and the driver side seat belt is unfastened*3, *5; 4) the ignition switch is ON and the driver side seat belt is unfastened*3, *6; or 5) the vehicle speed 120 km/h (74 mph) or more.
Odometer and trip meter knob
Press and release the knob to scroll through trip "A", trip "B" and odometer figures.
Press and hold the knob to reset the trip meter.
Multi-display*7
The multi-display provides the following information: 1) outside temperature*8; 2) average fuel consumption for a certain distance; 3) instantaneous fuel consumption; 4) average speed for a certain distance; 5) runnable distance with the remaining amount of fuel; 6) compass; and 7) elapsed time since the ignition switch was turned ON.
Press INFO to change the display item.
Press RESET to clear the stored data.
Press H to adjust the hour of the clock.
Press M to adjust the minutes of the clock.
Press 00 to set the minutes to 00.
*1: w/ Light Reminder Warning System
*2: w/ Key Reminder Warning System
*3: w/ Seat Belt Reminder
*4: w/ Vehicle Speed Reminder
*5: for Australia and Europe
*6: for Middle East
*7: w/ Multi-display
*8: for Automatic Air Conditioning System