CAMSHAFT OIL CONTROL SOLENOID ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

   
   

   1. Connect the GTS to the DLC3.

   2. Start the engine.

   3. Turn the GTS on.

   4. Enter the following menus: Powertrain / Engine / Active Test / Control the Intake VVT OCV Duty Ratio Bank 1 / Data List / All Data / Intake VVT Change Angle Bank 1.

      
      Powertrain > Engine > Active Test

      Active Test Display
      Control the Intake VVT OCV Duty Ratio Bank 1

      Data List Display
      Intake VVT Change Angle Bank 1

   5. Read the Data List while performing the Active Test with the engine idling.

      OK
      GTS Operation Data List (Intake VVT Change Angle Bank 1) -100% to 100% Varies by 75 DegFR or more

      If the result is not as specified, check the camshaft timing oil control solenoid assembly, wire harness and ECM.