FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE

  1. REMOVE FRONT WHEEL RH

    Click here

  2. SEPARATE FRONT FENDER LINER RH

    1. Remove the 3 bolts, 2 screws and 2 clips, and separate the front fender liner RH.

  3. REMOVE FAN AND GENERATOR V BELT

    Click here

  4. REMOVE WATER PUMP DRIVE BELT

    Click here

  5. REMOVE CRANKSHAFT PULLEY

    1. A319013N01

      Turn the crankshaft clockwise and install SST as shown in the illustration.

    2. Using SST, hold the flywheel sub-assembly.

      0109-2

      0109-2B

    3. A338055

      Remove the 3 bolts and crankshaft pulley.

  6. REMOVE CRANKSHAFT PULLEY HUB OIL SEAL

    1. A338056

      Using a screwdriver with its tip wrapped with protective tape, pry out the crankshaft pulley hub oil seal. Using a screwdriver, pry out the timing chain cover oil seal.

      Note:

      After removal, check the crankshaft for damage. If damaged, smooth the surface with 400-grit sandpaper.